Furnace Repair in Florence, Colorado Done Right the First Time

When your furnace quits in Florence, Colorado, you need it fixed today, not next week. Furnace Pros Colorado delivers same-day furnace repair in Florence with licensed technicians who carry the tools to diagnose and fix the problem on the first visit. We service every major brand, from Lennox and Carrier to Goodman and Rheem, and we stock common parts like flame sensors, igniters, and blower motors on every truck. One call gets a tech to your door.

Call Now Book Online

Emergency response Google rating Brands serviced

Licensed Licensed & Bonded

Fully Insured Insured & Bonded

24/7 Emergency Same-Day Response

Warranty Backed Workmanship Guaranteed in Florence

Furnace Repair in Florence You Can Count On

Furnace Repair in Florence is the work we do most, and it shows in how we run our trucks. Florence sits in Fremont County along the Arkansas River, where winter nights drop into the single digits and the wind coming off the Wet Mountains pushes hard against older housing stock. That combination is brutal on furnaces. We see cracked heat exchangers in 1970s ranch homes near downtown, short-cycling units in the newer builds off Colorado 115, and dirty flame sensors in just about everything. Our technicians live and work in this region, so we know which neighborhoods have older gas furnaces that need annual tune-ups and which ones have high-efficiency systems that need combustion analysis. We carry NATE-certified techs, stock parts for Lennox, Carrier, Trane, Goodman, Rheem, York, Bryant, American Standard, Amana, and Coleman, and we test every repair with a manometer and combustion analyzer before we call it done. Whether you need emergency furnace repair at 2 a.m. or a scheduled furnace tune-up before the first hard freeze, we show up when we say we will and we charge what we quote.

Locally licensed and insured in Florence
Same-day diagnostics and written estimates
Real workmanship warranty in writing
Background-checked, in-house technicians

Furnace Repair Services Available in Florence

Florence homeowners call us for everything from a furnace blowing cold air to a full system replacement, and we handle all of it. Our trucks carry the tools and parts to fix most problems on the spot, from flame sensors and igniters to blower motors and gas valves. If you're searching for furnace repair near me in Florence, we're the local crew that answers the phone and shows up.

Furnace Repair

Our core service in Florence is diagnosing and fixing furnaces that won't heat. We test with a multimeter and manometer, check the flame sensor and igniter, inspect the heat exchanger, and verify gas pressure. Most repairs are done same-day, and we carry common parts on every truck so you're not waiting on a second visit.

View Details

Furnace Installation

New furnace installation in Florence means sizing the unit to your home, not just swapping boxes. We calculate load requirements, check ductwork and plenum condition, and install with code-correct venting and gas connections. We pull local building permits and walk you through the thermostat setup, whether you're using Nest or Honeywell.

View Details

Furnace Replacement

When your Florence furnace is past saving, we handle the full replacement. That includes hauling away the old unit, verifying the new one matches your ductwork, and testing combustion with a combustion analyzer. We work with all major brands and can usually schedule replacement within a few days of your estimate.

View Details

Furnace Tune-Up

A furnace tune-up in Florence covers cleaning the flame sensor, checking the igniter, testing gas pressure, inspecting the heat exchanger, and replacing your air filter. We recommend one every fall before the first freeze. It's the cheapest way to avoid a mid-winter breakdown and keep your warranty valid.

View Details

Furnace Maintenance

Ongoing furnace maintenance in Florence keeps your system running efficiently year after year. We track your service history, remind you when it's due, and check the components that fail most often in this climate. Regular maintenance catches small issues before they become emergency calls on a 10-degree night.

View Details

Emergency Furnace Repair

When your furnace dies at 2 a.m. in January, we answer. Our emergency furnace repair in Florence runs 24/7, and we prioritize no-heat calls during cold snaps. We carry the parts to fix most emergencies on the first visit, so you're not waiting through a second appointment while your pipes freeze.

View Details

Gas Furnace Repair

Gas furnace repair in Florence means working safely with gas valves, thermocouples, and venting. We test for leaks, verify gas pressure with a manometer, and inspect the heat exchanger for cracks. If your gas furnace is making banging noises or tripping the breaker, call us before it becomes a safety issue.

View Details

Electric Furnace Repair

Electric furnace repair in Florence covers heating elements, sequencers, blower motors, and control boards. We use a clamp meter to test amp draw and a multimeter to trace electrical faults. Electric furnaces are common in some of the newer builds here, and we stock the parts to fix them fast.

View Details

High-Efficiency Furnace Repair

High-efficiency furnace repair in Florence requires techs who understand condensing systems, PVC venting, and secondary heat exchangers. We use a combustion analyzer to verify your unit is running at its rated efficiency. If your high-efficiency furnace is leaking water or short cycling, we know where to look.

View Details

Furnace Cleaning

Furnace cleaning in Florence goes beyond swapping the air filter. We vacuum the burners, clean the flame sensor, inspect the blower motor, and check the heat exchanger for debris. A clean furnace runs cooler, lasts longer, and keeps your indoor air cleaner during the winter months.

View Details

Service · #1

Furnace Repair in Florence

When your furnace quits in Florence, Colorado, you need furnace repair in Florence fast. Our technicians know the older ranch homes and new builds along Main Street and near Florence High School, plus the cold Arkansas River valley winters that stress every system. We diagnose no-heat calls, short cycling, and strange noises with same-day service, honest pricing, and parts stocked for the brands most common in Fremont County.

No-Heat Calls Solved Fast

Florence winters drop below freezing often, so a dead furnace is urgent. We troubleshoot igniters, flame sensors, gas valves, and control boards on the spot. If you search for furnace repair near me in Florence, our trucks carry common parts for Carrier, Trane, and Lennox units found throughout downtown and the Oil Creek area.

Short Cycling and Odd Noises

Furnaces that click, rumble, or shut off early usually have airflow or ignition problems. We inspect filters, blower motors, and heat exchangers in Florence homes, especially older properties near Pioneer Park where ductwork may be undersized. Fixing short cycling restores steady heat and lowers your energy bill.

Thermostat and Electrical Faults

Sometimes the furnace is fine but the thermostat or wiring is not. We test low-voltage connections, replace failed thermostats, and repair control boards in Florence houses from the 1950s to new construction. Our furnace repair service includes a full safety check so you know the system is running correctly.

Same-day diagnosis for no-heat and short-cycling furnace calls
Stocked igniters, flame sensors, and control boards for major brands
Heat exchanger inspection to rule out carbon monoxide risks
Thermostat and low-voltage wiring repair with safety verification

Furnace Installation in Florence

Furnace installation in Florence requires a contractor who understands local building codes and the temperature swings along the Arkansas River. We size new systems for your home's square footage, insulation, and ductwork, whether you live in a historic cottage near downtown or a newer build off Colorado 67. Our team handles permits, haul-away, and startup so you get reliable heat before the first hard freeze.

01

Proper Sizing for Florence Homes

An oversized furnace wastes gas and cycles constantly; an undersized one never keeps up. We perform a Manual J load calculation for your Florence property, factoring in ceiling height, window quality, and the cold air that settles in the river valley. The result is a furnace installation that heats evenly and runs efficiently.
02

Ductwork and Venting Checks

New furnaces need compatible ductwork and venting. In older Florence homes, we often find undersized returns or corroded flue pipes. We evaluate and modify duct systems, install proper PVC or metal venting, and confirm combustion air so your new unit meets code and performs safely through winter.
03

Permits and Final Startup

We pull the required Fremont County permits and schedule inspections so your furnace installation is fully legal. After mounting the unit, we connect gas and electrical, test static pressure, verify temperature rise, and walk you through the thermostat. You get a clean install and a system ready for Florence's coldest nights.

Manual J load calculation to size the furnace correctly
Permit handling and inspection coordination with Fremont County
Ductwork modification and venting installation to code
Full startup, temperature-rise test, and homeowner walkthrough

02 / 10

Service

5+ YEARS · FLORENCE

Furnace Replacement in Florence

Furnace replacement in Florence makes sense when repairs pile up or your system is past 15 years old. We remove the old unit, dispose of it responsibly, and install a new furnace matched to your home and budget. From the older neighborhoods near Florence Pioneer Museum to newer subdivisions, we handle the full swap in a day whenever possible.

Signs You Need Replacement

Frequent breakdowns, rising gas bills, yellow burner flames, or a cracked heat exchanger all point to replacement rather than repair. In Florence, many furnaces installed in the 1990s are now failing. We give you a straight assessment and explain when a new furnace saves money over repeated fixes.

Choosing the Right New Unit

We help you compare single-stage, two-stage, and modulating furnaces based on your comfort needs and budget. For Florence homes with uneven room temperatures, a two-stage model often solves the problem. We also discuss AFUE ratings so you understand long-term operating costs before you commit.

Removal and Clean Install

Our crew protects floors, disconnects gas and electrical safely, and hauls away the old furnace. We set the new unit level, reconnect ductwork, seal joints, and test operation. Every furnace replacement in Florence ends with a combustion analysis and a clean workspace.

Full removal and responsible disposal of your old furnace
Guidance comparing single-stage, two-stage, and modulating options
Duct sealing and reconnect for efficient airflow
Combustion analysis and cleanup after every replacement

Furnace Tune-Up in Florence

A furnace tune-up in Florence each fall prevents mid-winter breakdowns and keeps your warranty valid. Our technicians clean burners, check ignition, measure gas pressure, and inspect the heat exchanger. Whether your home sits near Florence River Park or out toward Penrose, we make sure your system is ready for the freezing nights ahead.

Burner cleaning and flame sensor inspection for safe combustion

Promise

“We clean the burners, inspect the flame sensor, lubricate moving parts, and test the igniter. We also check the blower motor, tighten electrical connections, and measure temperature rise. This furnace tune-up service …”

— Florence customer

What a Tune-Up Includes +

We clean the burners, inspect the flame sensor, lubricate moving parts, and test the igniter. We also check the blower motor, tighten electrical connections, and measure temperature rise. This furnace tune-up service in Florence catches small issues before they become expensive no-heat emergencies.

Why Fall Tune-Ups Matter +

Florence sees hard freezes from October through April. A furnace that ran fine last spring may fail on the first cold night if filters are clogged or the igniter is weak. Scheduling a tune-up before the season ensures reliable heat and can lower your monthly gas bill.

Extending Furnace Lifespan +

Regular tune-ups add years to your furnace. We track wear on belts, bearings, and burners so you can plan ahead. For Florence homeowners, an annual visit is the cheapest way to avoid emergency furnace repair and keep indoor air quality healthy for your family.

Burner cleaning and flame sensor inspection for safe combustion
Blower motor lubrication and electrical connection tightening
Temperature-rise measurement to verify efficient operation
Filter replacement and airflow check for better indoor air

Service · #5

Furnace Maintenance in Florence

Furnace maintenance in Florence is about more than a quick filter swap. We inspect the entire system, from gas lines and burners to ductwork and thermostat calibration. Our maintenance plans suit homeowners in the historic downtown blocks and the newer builds along the river, keeping heat steady through Fremont County's long winters.

Seasonal Maintenance Plans

Our maintenance plans include a fall inspection and a spring check, so your furnace is ready before and after heavy use. Florence customers get priority scheduling, reminder calls, and discounts on repairs. It is a simple way to protect your investment without thinking about it.

Safety Inspections Included

Every maintenance visit includes a carbon monoxide check, heat exchanger inspection, and gas leak test. These steps protect your family and catch problems early. In older Florence homes, we pay close attention to venting and combustion air, which are common sources of safety issues.

Keeping Efficiency High

Dirty burners, restricted airflow, and miscalibrated thermostats all waste energy. We clean components, adjust settings, and verify static pressure. Regular furnace maintenance in Florence keeps your AFUE rating close to factory specs, which means lower utility bills all winter.

Fall and spring maintenance visits with priority scheduling
Carbon monoxide and heat exchanger safety inspections
Gas leak testing and combustion air verification
Efficiency adjustments to lower monthly heating costs

Emergency Furnace Repair in Florence

Emergency furnace repair in Florence is available when your heat fails at 2 a.m. or on a holiday weekend. We answer calls from downtown, the River Park area, and rural addresses outside town. Our trucks carry common parts, so most emergencies are fixed in one visit, restoring warmth fast for your family.

01

Rapid Response Any Hour

When your furnace dies in a Florence cold snap, waiting until morning is not an option. We dispatch technicians around the clock, including weekends and holidays. You get a real person on the phone, an arrival window, and a tech who knows local furnace brands.
02

Common Emergency Fixes

Most emergency calls involve failed igniters, dirty flame sensors, tripped limit switches, or gas valve issues. We diagnose quickly and carry replacement parts for Carrier, Trane, Lennox, and Goodman units. If a part is not on the truck, we source it locally and return fast.
03

Staying Safe Until Help Arrives

If you smell gas, leave the house and call 911 before calling us. For no-heat situations without a gas smell, use space heaters safely and keep faucets dripping to prevent frozen pipes. Our dispatcher gives you clear steps while a technician heads to your Florence home.

24/7 dispatch with real-person phone answering
Stocked igniters, flame sensors, and gas valves on trucks
Same-visit repairs for most common furnace failures
Safety guidance while you wait for the technician

06 / 10

Service

5+ YEARS · FLORENCE

Gas Furnace Repair in Florence

Gas furnace repair in Florence demands a technician who respects combustion safety. We test gas pressure, inspect the heat exchanger, and check venting on every call. Whether your home is near the Florence Elks Lodge or out on County Road 67, we diagnose no-heat, weak flame, and gas smell issues with calibrated instruments and clear explanations.

Combustion and Gas Pressure

Proper gas pressure and clean combustion keep your furnace safe and efficient. We measure manifold pressure, adjust the gas valve if needed, and analyze flue gases. In Florence's older homes, we often find venting problems that affect combustion, so we correct those during the same visit.

Heat Exchanger Inspections

A cracked heat exchanger can leak carbon monoxide into your home. We inspect it visually and with a combustion analyzer on every gas furnace repair call in Florence. If we find a crack, we explain your options and help you decide between repair and replacement.

Ignition and Flame Problems

Weak flames, delayed ignition, and repeated lockouts usually trace to dirty burners, bad igniters, or faulty flame sensors. We clean and test each component, then verify the furnace lights reliably. Florence customers get a system that starts smoothly and runs safely all winter.

Manifold gas pressure testing and adjustment
Combustion analysis to verify safe flue gases
Heat exchanger inspection for carbon monoxide risks
Igniter, flame sensor, and burner cleaning and repair

Electric Furnace Repair in Florence

Electric furnace repair in Florence focuses on heating elements, sequencers, and blower components that wear out over time. We troubleshoot no-heat, short cycling, and breaker trips for homeowners near Florence High School and throughout Fremont County. Our techs test voltage, amperage, and resistance to pinpoint the fault and restore safe, steady heat.

Heating element testing and replacement with correct wattage

Promise

“Electric furnaces rely on heating elements that can burn out or short. We test each element for continuity and amperage draw, then replace failed ones with correct wattage. In Florence homes, we also check the sequenc…”

— Florence customer

Heating Element Failures +

Electric furnaces rely on heating elements that can burn out or short. We test each element for continuity and amperage draw, then replace failed ones with correct wattage. In Florence homes, we also check the sequencer that stages elements on and off to prevent overload.

Blower and Airflow Issues +

Weak airflow often means a failing blower motor, capacitor, or clogged filter. We measure static pressure and motor amp draw, then repair or replace components as needed. Restoring proper airflow helps your electric furnace in Florence heat evenly and avoid limit trips.

Breaker and Wiring Problems +

Electric furnaces draw high amperage, so loose connections and undersized breakers cause nuisance trips. We inspect the disconnect, breaker, and internal wiring, tightening terminals and replacing damaged parts. Every repair ends with a voltage and amperage check for safety.

Heating element testing and replacement with correct wattage
Sequencer and limit switch diagnosis and repair
Blower motor, capacitor, and airflow restoration
Breaker, disconnect, and high-voltage wiring inspection

Service · #9

High-Efficiency Furnace Repair in Florence

High-efficiency furnace repair in Florence requires techs trained on condensing technology, PVC venting, and secondary heat exchangers. We service 90%+ AFUE systems in homes near downtown and the river, diagnosing condensate leaks, pressure switch faults, and ignition problems. Our goal is to restore peak efficiency without compromising safety or comfort.

Condensate System Repairs

High-efficiency furnaces produce acidic condensate that must drain properly. Clogged traps, frozen lines, and failed pumps cause shutdowns. In Florence's cold winters, we insulate and reroute drain lines to prevent freezing, then test the full condensate path before leaving.

Pressure Switch Faults

Pressure switches verify proper venting and combustion air. When they fail, the furnace locks out. We test switch operation, inspect PVC venting for blockages or sagging, and confirm slope. Florence homes with long vent runs often need adjustments to meet manufacturer specs.

Secondary Heat Exchanger Care

The secondary heat exchanger captures extra heat but can corrode or clog. We inspect it for cracks and blockages, clean as needed, and verify combustion analysis. Repairing this component restores the efficiency that makes your high-efficiency furnace in Florence worth the investment.

Condensate trap cleaning and freeze protection for drain lines
Pressure switch testing and PVC venting inspection
Secondary heat exchanger inspection and cleaning
Combustion analysis to confirm peak AFUE performance

Furnace Cleaning in Florence

Furnace cleaning in Florence removes dust, debris, and buildup that reduce airflow and efficiency. We clean burners, blower wheels, and flame sensors, then vacuum the cabinet and check the heat exchanger. For homes near Pioneer Park and across Fremont County, this service improves indoor air quality and helps your system run cooler and quieter.

01

Deep Cleaning of Components

We remove the burners and clean each port, scrub the flame sensor, and vacuum the blower wheel and housing. Dust and rust flakes are common in older Florence furnaces, and they restrict airflow. A thorough cleaning restores proper combustion and reduces strain on the blower motor.
02

Indoor Air Quality Benefits

A dirty furnace circulates dust, allergens, and debris through your home. Cleaning the cabinet, heat exchanger, and blower reduces particles that trigger allergies. For Florence families, pairing furnace cleaning with a fresh filter is a simple way to breathe easier all winter.
03

Efficiency and Noise Reduction

Buildup on the blower wheel causes imbalance and noise. Cleaning it restores smooth operation and lowers amp draw. We also verify temperature rise after cleaning, so your furnace in Florence runs at the efficiency it was designed for.

Burner port cleaning and flame sensor scrubbing
Blower wheel and housing vacuuming for smooth airflow
Cabinet and heat exchanger debris removal
Filter replacement and temperature-rise verification

10 / 10

Service

Residential Furnace Repair in Florence

Most of our Florence calls are residential. We work on everything from small bungalows downtown to larger homes along the Arkansas River. Whether you're dealing with a furnace that won't ignite or you're ready for a high-efficiency upgrade, we handle it. We know the housing stock here, and we know what works.

Same-day furnace repair — When your furnace quits, we get there fast. We carry common parts on every truck, so most repairs are done on the first visit. If you're in Florence and your furnace is blowing cold air, call us before noon and we'll usually have heat back by dinner.
Furnace tune-ups and maintenance — We recommend a tune-up every fall for Florence homeowners. We clean the flame sensor, check the igniter, test gas pressure, inspect the heat exchanger, and replace your air filter. It's the cheapest way to avoid a mid-winter breakdown.
Furnace replacement and installation — If your furnace is past saving, we'll help you choose a new one that fits your home and your budget. We handle the permits, the installation, and the cleanup. Most replacements are done in a day, and we walk you through the thermostat setup before we leave.
Emergency furnace repair — We run 24/7 emergency service for Florence homeowners. If your furnace dies at 2 a.m., call us. We'll dispatch a tech and give you an honest ETA. We prioritize no-heat calls during cold snaps, so you're not waiting while your pipes freeze.

Commercial Furnace Repair in Florence

We also serve commercial properties in Florence, from small businesses downtown to larger facilities along Colorado 115. Commercial furnaces need scheduled maintenance to avoid downtime, and we work with property managers to keep systems running. If you're looking for commercial furnace repair near me in Florence, we're the local crew that shows up.

Retail storesRestaurantsOffice buildingsProperty managementLight industrial

Common Furnace Problems in Florence

Florence has a mix of older homes and newer builds, and the furnace problems we see reflect that. Older homes deal with aging components and cracked heat exchangers, while newer homes deal with high-efficiency systems that need regular maintenance. The valley climate adds temperature swings that stress furnaces year-round.

Dirty flame sensor causing furnace to shut off

Florence's older housing stock often has furnaces that haven't been serviced regularly. The flame sensor gets coated with carbon and stops detecting the flame, so the furnace shuts off as a safety measure.

Cracked heat exchanger in older furnaces

Many Florence homes have furnaces that are 15 to 25 years old. Over time, the heat exchanger metal fatigues and cracks, especially with the temperature swings we get in the Arkansas River valley.

Short cycling in high-efficiency furnaces

High-efficiency furnaces are common in newer Florence developments. They're sensitive to airflow problems, so a clogged filter or undersized ductwork can cause short cycling, which wastes energy and wears out components.

Furnace tripping breaker due to blower motor failure

Blower motors draw more amps as they age, especially in dusty environments. When the motor starts to fail, it pulls too much current and trips the breaker. This is common in Florence homes with pets or older ductwork.

Signs You Need Furnace Repair in Florence

Your furnace usually gives you warning signs before it quits completely. If you notice any of these, call us before you're stuck without heat on a cold night. Catching a problem early usually means a cheaper, faster fix.

Furnace is blowing cold air

If your furnace is running but not heating, the problem is usually the flame sensor, igniter, or gas valve. This is one of the most common calls we get in Florence, and it's usually a same-day fix.
Furnace is making banging or popping noises

Banging or popping sounds often mean a cracked heat exchanger or delayed ignition. Both are safety issues. Turn off your furnace and call us immediately.
Furnace is short cycling

If your furnace turns on and off every few minutes, it's short cycling. This can be caused by a clogged filter, a failing thermostat, or an oversized furnace. It wastes energy and wears out your system.
Furnace is tripping the breaker

If your furnace keeps tripping the breaker, there's an electrical problem. It could be a bad blower motor, a short in the wiring, or a failing control board. Don't keep resetting the breaker. Call us.
Furnace is leaking water

High-efficiency furnaces produce condensation, but if you're seeing water around your furnace, something's wrong. It could be a clogged drain line or a cracked heat exchanger. Both need professional attention.

Furnace Repair Pricing in Florence

Furnace repair pricing in Florence depends on what's wrong and what parts are needed. Most repairs fall between $180 and $450, including the diagnostic and the part. If your furnace needs a new blower motor or control board, expect the higher end of that range. If it's a flame sensor or igniter, you'll be on the lower end. We charge a flat diagnostic fee that we waive if you proceed with the repair, and we give you the price before we start work. We don't do surprise charges. For 2026, our pricing reflects current parts costs and labor rates in Fremont County, and we're happy to walk you through the estimate before we pick up a tool.

Basic Service

$89 starting · per visit

Diagnostic visit
Written estimate
Same-day scheduling
30-day warranty

Book This Plan

Navigating Florence: Landmarks We Use

Florence is a small city, but knowing the landmarks helps us get to you faster. We use the Fremont County Courthouse and the Florence Pioneer Museum as orientation points for downtown calls, and we route along Colorado 115 and Colorado 67 for calls outside the city center. If you're giving directions, mention the nearest landmark and we'll find you.

Fremont County Courthouse

The courthouse is a central orientation point for downtown Florence. If you're near the courthouse, we know exactly which streets to take and can usually reach you within 30 minutes.

Florence Pioneer Museum

The museum sits in the historic downtown area and helps us locate calls on the older streets nearby. It's a useful reference point when giving directions over the phone.

Arkansas River

The Arkansas River runs along the edge of Florence and serves as a natural boundary for our service area. If you're on the river side of town, we know which routes to take to avoid delays.

Coverage across Florence & Fremont County

8122681290

Plus surrounding Fremont County neighborhoods, with same-day routing on most appointments.

How Florence Seasons Affect Your Furnace

Florence has four distinct seasons, and each one puts different demands on your furnace. Understanding what to expect can help you stay ahead of problems and avoid emergency calls.

Spring

Spring in Florence brings temperature swings and the last few cold snaps. Your furnace is still running, but less often. This is a good time to schedule a tune-up before you stop using it for the season.

Tip: Book a spring tune-up to clean the flame sensor, check the igniter, and replace your air filter. It's cheaper than an emergency call and keeps your system ready for next winter.

Summer

Summer is when your furnace sits idle, but that doesn't mean you should ignore it. Dust and debris can settle in the system, and small issues can get worse while the furnace isn't running.

Tip: Use summer to schedule maintenance or replacement. If your furnace is old and you know it needs replacing, doing it in summer means you're not scrambling when the first cold snap hits.

Fall

Fall is when Florence homeowners start thinking about heating again. The first freeze usually hits in October or early November, and that's when we get a rush of no-heat calls.

Tip: Schedule your fall tune-up in September or early October, before the rush. We'll clean the flame sensor, test the igniter, check gas pressure, and make sure your furnace is ready for winter.

Winter

Winter in Florence means cold nights and heavy furnace use. This is when we see the most emergency calls, especially during cold snaps when furnaces are running constantly.

Tip: Change your air filter monthly during winter, and keep an eye out for strange noises or short cycling. If your furnace quits, call us immediately. We run 24/7 emergency service.

Nearby Cities We Serve from Florence

Florence is part of a larger service region that includes Fremont County and the surrounding areas. We run trucks through these nearby cities regularly, so if you're just outside Florence, we can still get to you.

(City)

Agate

Agate is northeast of Florence, about an hour and a half drive. We serve Agate on scheduled routes and can usually get there within a day or two.

View Agate

(City)

Allenspark

Allenspark is northwest of Florence, up in the mountains. We serve Allenspark on scheduled routes and for emergency calls when conditions allow.

View Allenspark

(City)

Antonito

Antonito is far south of Florence, near the New Mexico border. We serve Antonito on scheduled routes and can arrange service with advance notice.

View Antonito

(City)

Arboles

Arboles is southwest of Florence, near the Navajo Reservoir. We serve Arboles on scheduled routes and for emergency calls when we have a truck in the area.

View Arboles

(City)

Arvada

Arvada is north of Florence, in the Denver metro area. We serve Arvada on scheduled routes and can usually get there within a day.

View Arvada

(City)

Aspen

Aspen is northwest of Florence, up in the mountains. We serve Aspen on scheduled routes and for emergency calls when conditions allow.

View Aspen

FAQs About Furnace Repair in Florence

Real answers from our team for the questions we hear most often before a job starts.

Talk to a real pro: (833) 588-3896

How much does furnace repair cost in Florence?

Most furnace repairs in Florence run between $180 and $450, including the diagnostic and the part. Simple fixes like a flame sensor or igniter are on the lower end, while blower motors and control boards are on the higher end. We waive the diagnostic fee if you proceed with the repair, and we give you the price before we start work.

How fast can you get to my house for emergency furnace repair in Florence?

We aim to be at your door within 60 to 90 minutes for emergency calls in Florence, depending on where you are and what time you call. During cold snaps, we prioritize no-heat calls and may have a longer wait, but we'll give you an honest ETA when you call.

Do you repair all furnace brands in Florence?

Yes. We repair Lennox, Carrier, Trane, Goodman, Rheem, York, Bryant, American Standard, Amana, and Coleman furnaces, among others. Our trucks carry parts for all major brands, so we can fix most problems on the first visit.

How often should I schedule furnace maintenance in Florence?

We recommend a furnace tune-up every fall, before the first freeze. If your furnace is older or you've had problems before, twice a year, in spring and fall, is even better. Regular maintenance catches small issues before they become emergency calls.

What should I do if my furnace is blowing cold air?

First, check your thermostat to make sure it's set to heat and the temperature is above the current room temperature. If that's not the issue, check your air filter. If it's dirty, replace it. If the furnace is still blowing cold air, call us. It's usually a flame sensor, igniter, or gas valve issue, and we can fix it same-day.

Get Furnace Repair in Florence Today

If your furnace is giving you trouble, don't wait. We offer same-day furnace repair in Florence and 24/7 emergency service for no-heat situations. Our techs are licensed, insured, and NATE-certified, and we carry the parts to fix most problems on the first visit. Call us at (833) 588-3896 or book online. We'll get your heat back on.

Call Now Send a Message

Get In Touch With Us

Call (833) 588-3896 any time, day or night. A live dispatcher answers, asks what your furnace is doing, and gives you a real arrival window. For non-emergency tune-ups and installs, email us and we'll get back to you the same business day.

Call (833) 588-3896

Furnace Pros Colorado

Phone
(833) 588-3896
Address

Colorado
Hours

Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available